manualshive.com logo in svg

Trox KSFS, Руководство по установке и обслуживанию

Поделиться
Скачать
Trox KSFS Скачать руководство пользователя страница 4

Protective gloves

Protective gloves protect hands from friction, abra-
sions, punctures, deep cuts, and direct contact with
hot surfaces.

Supply package, transport and storage

Supply package

Casing

Filter element (optional)

Transport

 CAUTION!

Danger of injury from sharp edges, sharp cor-
ners and thin sheet metal parts!

Sharp edges, sharp corners and thin sheet metal
parts may cause cuts or grazes.

–

Be careful when carrying out any work.

–

Wear protective gloves, safety shoes and a
hard hat.

Use only lifting and transport gear designed for the
required load. Always secure the load against tip-
ping and falling.

Upon delivery, carefully remove the packaging and
check the unit for transport damage and complete-
ness.

Storage

Please note:

Store the unit only in its original packaging

Protect the unit from the effects of weather

Protect the unit from humidity, dust and con-
tamination

Storage temperature: -10 °C to 50 °C.

Relative humidity: 95 % max., no condensation

Supply package, transport and storage

 

KSFS 

∙

 KSFS-...-Ex Ducted particulate filters

4

Содержание KSFS

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды