2
Transport, storage and
packaging
Sharp edges and sheet metal parts
CAUTION!
Danger of injury from sharp edges and sheet
metal parts.
–
Always wear protective gloves when handling the
unit.
Damage to the VAV terminal unit
NOTICE!
Risk of damage to the VAV terminal unit!
–
Handle the unit with care.
–
Do not lift the VAV terminal unit by its control
components, the damper blade or differential
pressure sensor.
–
Lift the unit only by lifting the entire casing.
2.1 Delivery check
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the ship-
ping company and your supplier immediately.
The delivery is typically completed mounted on a VAV
terminal unit.
Check the following items on delivery:
Easy-controller
–
Transparent protective cap, or for TVE-type
rubber terminal covers.
–
mounted on the VAV terminal unit and fixed with
anti-rotation lock
–
Measuring hoses without kinks connected to the
VAV terminal unit (not with TVE type)
VAV terminal unit:
–
Scale sticker available for setting V
min
/V
max
–
Adjustments sticker available
–
Cable ties for wire clamping bracket available
(not for TVE type)
2.2 Transport on site
If possible, transport the VAV terminal unit to the
installation location in the shipping container.
Do not remove the protective wrapping until just
before installation.
2.3 Storage
If the product has to be stored temporarily:
Moisture and lack of ventilation can lead to oxida-
tion, even on galvanised components. Remove any
plastic wrapping in order to avoid oxidation.
Protect the product from dust and contamination.
Store the product in a dry place and away from
direct sunlight.
Do not store the product below -10 °C or above
+50 °C.
2.4 Packaging
Properly dispose of packaging material.
Transport, storage and packaging
Packaging
Control component Easy for VAV terminal units
9
