background image

Qualified staff

Specialist personnel

Specialist personnel are individuals who have suffi-
cient professional or technical training, knowledge
and actual experience to enable them to carry out
their assigned duties, understand any potential haz-
ards related to the work under consideration, and
recognise and avoid any risks involved.

Personal protective equipment

Personal protective equipment must be worn for
any work in order to reduce health or safety haz-
ards to the minimum.

The appropriate protective equipment for a job must
be worn for as long as the job takes.

Industrial safety helmet

Industrial safety helmets protect the head from
falling objects, suspended loads, and the effects of
striking the head against stationary objects.

Protective gloves

Protective gloves protect hands from friction, abra-
sions, punctures, deep cuts, and direct contact with
hot surfaces.

Safety shoes

Safety shoes protect the feet against crushing,
falling parts, and slipping on slippery ground.

Limitation of liability

The information in this manual has been compiled
with reference to the applicable standards and
guidelines, the state of the art, and our expertise
and experience of many years.

The manufacturer does not accept any liability for
damages resulting from:

Non-compliance with this manual

Incorrect use

Operation or handling by untrained individuals

Unauthorised modifications

The actual scope of delivery may differ from the
information in this manual for special constructions,
additional order options or as a result of recent
technical changes.

Important notes

Air diffusers X-GRILLE Basic / Cover

2

Содержание X-GRILLE













Отзывы: