Trox Technik X-CUBE compact Скачать руководство пользователя страница 37

Страница: 37 / 144

Powered dampers

Personnel:



HVAC technician

Protective equipment:



Industrial safety helmet



Protective clothing



Protective gloves



Safety shoes

Adjust the linkage in such a way that the angle of

rotation is 90° and the dampers close completely.

Powered multileaf dampers have been set up.

Coupled dampers (for plate heat exchanger)

Personnel:



HVAC technician

Protective equipment:



Industrial safety helmet



Protective clothing



Protective gloves



Safety shoes

Check that the friction locking of the linkage is cor-

rect.

Check the direction of rotation direction and

ensure that the blades fully open and close.

Check that all screw joints and connections are

tight.

The coupled multileaf dampers have been set

up.

6.3.4 Rotary heat exchanger

WARNING!

Risk of injury from the incorrect handling and

operation of fans!

Incorrect handling, e.g. reaching into rotating parts,

can lead to serious injuries.

–

Never reach into or tamper with the storage

mass

–

The fan does not stop immediately! Check that

no parts are moving before you open an inspec-

tion access panel.

–

Do not put a damaged or defective rotary heat

exchanger into operation.

–

Switch off the system before you start working on

movable parts of the rotary heat exchanger and

secure it against accidentally being switched on

again. Wait until all parts have come to a stand-

still.

WARNING!

Risk of injury caused by hot surfaces!

The storage mass drive motor generates high tem-

peratures. Skin contact with hot surfaces on the drive

motor will cause severe skin burns.

–

Switch off the air handling unit before working on

the rotary heat exchanger and secure the unit

against restarting

–

After switching off the air handling unit, wait until

all surfaces have cooled to the ambient tempera-

ture

Adjusting the rotary heat exchanger

The storage mass of the rotary heat exchanger is fac-

tory set. You may have to adjust the storage mass to the

actual installation conditions, see

Appendix

‘Adjusting the storage mass’ on page 50

Initial commissioning

Setting up and adjusting AHU casing units > Rotary heat exchanger

Air handling unit X-CUBE compact

Содержание X-CUBE compact

















































































































































Результаты поиска

Содержание X-CUBE compact

Отзывы:

Похожие инструкции для X-CUBE compact

Бренды по названию

Популярные бренды

Trox Technik X-CUBE compact, Руководство по транспортировке и установке

Результаты поиска

Содержание X-CUBE compact

Отзывы:

Похожие инструкции для X-CUBE compact

Бренды по названию

Популярные бренды