Trox Technik SCHOOLAIR-S-HV, Инструкция по установке и эксплуатации

Страница: 51 / 56

B EU declaration of conformity
EC declaration of conformity
according to the EU Machinery Directive 2006/42/EC, Annex II 1. A
Manufacturer
TROX GmbH
Heinrich-Trox-Platz
D - 47504 Neukirchen-Vluyn
Person established in the Community authorised to
compile the technical file
Jan Heymann, TROX GmbH
Product / Article decentralised ventilation unit
Type Schoolair-S-HV
Description and identification of the machinery
It is expressly declared that the machinery fulfils all relevant provisions of the following EU Directives or Regulations:
2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC (recast) (1)
2014/30/EU Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
2014/35/EU Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits
Reference to the harmonised standards used, as referred to in Article 7 (2):
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions
required for access openings
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery
operation
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and
component parts of machinery
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with
surfaces -
Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 12100:2010-11 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO
12100:2010)
EN ISO 14118:2018 Safety of machinery — Prevention of unexpected start-up (ISO 14118:2017)
EN ISO 13854:2019 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)
EN ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
(ISO 13857:2019)
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-
1:2016, modified)
Neukirchen-Vluyn, 15.09.2022
Jan Heymann
Authorised Representative, CE-marked
products
Page 1/1
EU declaration of conformity
Decentralised ventilation units SCHOOLAIR-S-HV 51