Accessories 2
Cover grille
FKR-EU
1
K4 – 1.1 – 14
Cover grille with extension
piece FKR-EU
Application
– If only one end is to be ducted on site,
the other end must have a cover grille
– For certain nominal sizes extension pieces
may be required, see table
– Fire damper, cover grille and,
if applicable, extension piece
are factory assembled to form a unit
– The free area of the cover grille is approx. 70%
– The fixing holes in the cover grilles
and extension pieces match those in the fire
damper flanges (applies only to FKR-EU-FL)
– Cover grilles are also available separately
– Cover grilles both ends are approved
in Germany only for Type FK-EU fire dampers
used as air transfer dampers, general building
inspectorate licence Z-6.50-2031
Materials and surfaces
– Cover grilles made of galvanised sheet steel
(and powder-coated silver grey, RAL 7001,
when used with powder-coated (1)
and stainless steel (2) dampers)
Note
For further information relevant to design,
in particular information on installation situations,
please refer to the operating
and installation manual.
Description
/
A0 /
/
0A /
/
AS /
/
SA
/
Order code detail
Technical data
Cover grille for FKR-EU
Operating side
Installation side
Order code
Cover grille
–
A0
–
Cover grille
0A
Cover grille
Flexible connector
AS
Flexible connector
Cover grille
SA
Arrangement and length of extension pieces (dimensions in mm)
Nominal size
Operating side
Installation side
Construction variant
FKR-EU / FKR-EU-FL
315
175 / –
175 / 175
355
175 / –
175 / 175
400
175 / –
175 / 175
450
175 / –
175 / 175
500
175 / –
175 / 370
560
175 / –
370 / 370
630
175 / –
370 / 370
710
175 / –
370 / 370
800
175 / 175
370 / 370
03/2017 – DE/en
TOC