Skilled qualified electrician
Skilled qualified electricians are individuals who have
sufficient professional or technical training, knowledge
and actual experience to enable them to work on elec-
trical systems, understand any potential hazards related
to the work under consideration, and recognise and
avoid any risks involved.
1.6 Personal protective equipment
Personal protective equipment is equipment that pro-
tects the user against health or safety risks at work.
Personal protective equipment must be worn for various
types of work; the protective equipment required is
listed in this manual together with the description of
each type of work.
Description of personal protective equipment
Industrial safety helmet
Industrial safety helmets protect the head from falling
objects, suspended loads, and the effects of striking the
head against stationary objects.
Protective gloves
Protective gloves protect hands from friction, abrasions,
punctures, deep cuts, and direct contact with hot sur-
faces.
Safety shoes
Safety shoes protect the feet from crushing, falling parts
and prevent slipping on a slippery floor.
1.7 General safety measures
NOTICE!
Risk of damage to property due to large tempera-
ture differences
If any electronic components have been kept in an
unheated area, condensation may form and damage
the electronic components beyond repair.
–
Before you start commissioning, make sure that
all devices have warmed up to the ambient tem-
perature. Only after about 2 hours will the system
have reached ambient temperature.
Foreign matter and liquids
NOTICE!
Risk of damage to property due to foreign matter
and liquids!
Foreign matter and liquids that get into the unit may
damage the electronic parts.
–
Do not use any liquids for cleaning.
–
Remove foreign matter, if any.
–
If the device emits a smell or smoke, have it
checked by the manufacturer.
–
If liquid gets into the module, let the module com-
pletely dry before commissioning.
1.8 Repair and replacement parts
Only qualified personnel can repair the devices, and
only genuine replacement parts are allowed to be used.
This applies to work on the electrical equipment. There-
fore, for safety reasons, have defective devices repaired
by TROX Technical Service,
.
Safety
Repair and replacement parts
Control component Compact XM0 • XS0 for VAV terminal unit TVE
8
