Trox Technik AIRNAMIC Series, Руководство по установке

Страница: 9 / 14

Ceiling systems
Fig. 16: Ceiling systems
j Installation in T-bar ceilings
k
Installation into grid ceilings
l
Installation in continuous ceilings
Fixing the diffuser face to the plenum box
In order to protect the surface of the diffuser face,
unpack and install it only after all other construc-
tion steps have been completed.
If there is a lengthy break between installation
and commissioning, cover all openings of the
casing (e.g. with plastic) to protect the interior
and avoid cumbersome cleaning procedures at
the time of commissioning.
Fig. 17: Installing the diffuser face
1. Glue the seal (Fig. 17/5) onto the reverse
edge of the plenum box.
2. Fix the diffuser face (Fig. 17/2) with the cen-
tral fixing screw (Fig. 17/3) to the cross bar
(Fig. 17/1) and cover it with the decorative
cap (Fig. 17/4).
The diffuser face and the fixing elements
may differ from the variant shown.
Installation
Air terminal devices AIRNAMIC 9