Trotec TTW-25000S, Руководство по эксплуатации

Страница: 2 / 8

Operating manual – TTW 25000 S/TTW 35000 S B - 1 EN
TABLE OF CONTENTS
01. General description . . . . . . . . . . . . . . . . . A - 01
02. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 01
03. Assembly Manual . . . . . . . . . . . . . . . . . . . A - 02
04. Operation . . . . . . . . . . . . . . . . . . . . . . . . . B - 02
05. Care and maintenance . . . . . . . . . . . . . . . A - 02
06. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . A - 03
07. Technical data . . . . . . . . . . . . . . . . . . . . . A - 03
This release replaces all previous releases. No part of this publication may be
reproduced without written permission. The same applies for electronically
processing, duplicating or spreading the publication. Subject to technical
changes. All rights reserved. Trademarks are used without guarantee that they
may be used freely and primarily following the spelling of the manufacturer. The
product names used are registered and should be treated appropriately. The right
to make construction changes in the interests of constant product improvement
as well as changes to the shape and colour is reserved. The scope of delivery
may vary from product images. This document was produced with all due care.
We accept no liability whatsoever for mistakes or omissions. © Trotec
01. GENERAL DESCRIPTION
Trotec fans circulate larger quantities of air at a low
speed. All models are equipped with a 3-bladed
aluminium fan wheel with anodized, weather-
resistant paint. The fan housing is manufactured of
galvanized high speed steel in safety yellow, the wire
protective grid is powder-coated.
02. SAFETY
• Make sure that the power source meets the
electrical requirements of the fan.
• If possible, do not use an extension cable. If you
have to use an extension cable nonetheless, please
make sure that the cable has an appropriate cross-
section in order to prevent the risk of overheating.
m
Never use just one extension cable for the
simultaneous operation of several fans.
• Do not kink the cable and prevent contact with
oil, grease, chemicals, hot surfaces or sharp and
abrasive objects.
• This fan may ONLY be taken into operation with the
designated protective grid. It is to keep people and
objects from coming into contact with the fan wheel.
Failure to comply with this stipulation leads to the
instantaneous termination of the warranty and could
pose a serious risk.
• Never poke your fingers or other items into the
fan. Never block openings during operation and
do not carry out any conversions or unauthorized
modifications of the device. Never touch the motor.
It can be hot, so touching it would result in injuries.
Never use this device with non-contact control units
in order to reduce the risk of electric shock or fire.
• The fan must ONLY be used for air circulation. It
must not be used in potentially dangerous locations
such as in combustible, explosive or chemically
charged atmospheres. Never stick duct tape to the
device.
• The fan motor is equipped with an automatic
overheating protection, which interrupts the power
supply as soon as the device begins to overheat.
Before you remove the protective grid or work on
the motor, always pull the power plug, for it cannot
be ruled out that the device starts up unexpectedly.
• If a defect at the fan could cause property damage,
we recommend the application of a suitable alarm
system (air pressure switch, temperature sensor
etc.).
• Never use the fan if its power cable or plug is
damaged. In such an event dispose of the fan
accordingly or bring it to an authorized specialist
dealer for examination or repair.