Trotec TTK QUBE, Оригинальное руководство пользователя, Страница: 8 / 19

8 EN dehumidifier TTK Qube
Inserting the air filter
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
• Make sure that the air filter is installed before switching
the device on.
Positioning the condensation drain hose
Note
Do not use the device without the condensation drain
hose connected!
ü
A suitable hose (diameter: 8 mm) is ready for use.
ü
The device is switched off.
1. Connect the condensation drain hose to the hose
connection.
2. Make sure that the condensation drain hose is properly
connected to the device and free of damage.
3. Depending on the application, position the end of the
condensation drain hose as follows:
ð
Place a sufficiently dimensioned container (at least
90 litres) near the device and insert the hose end. The
device is equipped with a pump and is able to pump the
water up to a height of 10 m. Check the filling level of
the container regularly.
ð
Completely unwind the hose and guide the hose end to
a water drain. Avoid kinking or pinching the hose. The
hose end must not lay in the water!
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.