background image

2

Operating Manual – Dehumidifier TTK 75 E

EN

Description of the device

This device uses the principle of condensation to au-
tomatically dehumidify rooms.
The fan sucks damp room air through the air inlet (7),
the air filter (8), the evaporator and to the condenser
located behind it. The air is cooled at the cold evapo-
rator until it is below the dew point. Water vapour con-
tained in the room air precipitates on the evaporator
fins as either condensation or frost. The dehumidified,
cooled air is rewarmed at the condenser and blown
out at a temperature of approx. 5 °C above room tem-
perature. The drier air which is prepared in this way
mixes with the air in the room. The humidity in the
room where the device is positioned is reduced as air
constantly circulates through the device. Depending
on the air temperature and the relative humidity, the
condensed water either drops continuously or only
during the defrost phase into the condensation tray
and through the integrated drain nozzle into the con-
densation tank (3) below. This is fitted with a float to
measure the fill level. The device has a control
panel (1) for operating and controlling the functions.
Once the maximum fill level of the condensation
tank (3) is reached, the condensation tank indicator
light (see chapter Operating elements) on the control
panel (1) flashes. The device switches off. The con-
densation tank indicator light only goes out again once
the emptied condensation tank (1) is reinserted. The
condensed water can be diverted by attaching a hose
at the condensation plug (6). The device can reduce
the relative humidity of a room by up to approx. 30 %.
It provides additional assistance for drying wet wash-
ing or clothing in living or working spaces. Because of
the heat radiation which is tied up in operation, the
room temperature can rise by approx. 1 – 4 °C.

Device depiction

Information about the device

No.

Operating element

1

control panel

2

lateral carry handles

3

condensation tank

4

wheels

5

air outlet

6

condensation plug

7

air inlet

8

air filter

1

7

4

5

6

2

3

8

Содержание TTK 75 E





















Отзывы: