8
EN
oil-filled radiator TRH 20 E / TRH 21 E / TRH 22 E / TRH 23 E / TRH 24 E
Assembly
Warning of electrical voltage
Risk of injury due to incorrect assembly!
Local or national regulations may apply for installation..
We recommend to have the installation carried out by a
qualified electrician.
Warning
Risk of fire due to improper installation!
There is a risk of fire if the required minimum
distances are not observed.
Observe the “Installation” section in the “Assembly and
start-up” chapter and the technical data in the
“Technical annex” chapter.
Mounting the castors (TRH 20 E/TRH 21 E/TRH 22 E/
TRH 23 E)
Make sure to mount the castors before you set the device up.
1. Place the device upside down on a scratch-proof, even
surface and in a stable position.
2. Screw respectively two of each of the castors and cap nuts
to one of the mounting plates.
3. Detach the wing nuts from the U‑bolts.
4. Position the respective U‑bolt between either the first or
the last two ribs at the device bottom.
