EN
3
fan heater TFC 25 E
•
Only put up the device in an upright, stable position on firm
ground.
•
Let the device dry out after a wet clean. Do not operate it
when wet.
•
Do not use the device with wet or damp hands.
•
Do not expose the device to directly squirting water.
•
Never insert any objects or limbs into the device.
•
Do not cover the device during operation.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Do not sit on the device.
•
This device is not a toy. Keep away from children and
animals. Do not leave the device unattended during
operation.
•
Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The mains connection must correspond to the
specifications in the Technical annex.
•
Insert the mains plug into a properly fused mains socket.
•
Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the power cable is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
annex.
•
Keep a safety distance of at least 1 m between the air inlet
and the air outlet of the device and all combustible
materials such as textiles, curtains, beds and sofas.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that the suction side is kept free of dirt and
loose objects.
•
Do not place the device on combustible ground.
•
Only use original spare parts, for otherwise safe and
functional operation cannot be ensured.
•
Allow the device to cool down before transport and/or
maintenance work.
•
The device must not be positioned directly beneath a wall
socket.
•
Do not use the device if it has been dropped or if it shows
visible signs of damage.
•
Do not use the heating device together with a
programming device, a timer, a separate remote control
system or any other device that automatically switches the
heating device on, as there is a risk of fire if the heating
device is covered or incorrectly positioned.
•
Use the CR 2032 button battery type.
•
Do not insert rechargeable batteries into the remote
control.
•
Never charge batteries that cannot be recharged.
•
Different types of batteries and new and used batteries
must not be used together.
•
Insert the batteries into the battery compartment according
to the correct polarity.
•
Remove discharged batteries from the device. Batteries
contain materials hazardous to the environment. Dispose
of the batteries according to the national regulations.
•
Remove the batteries from the remote control if you will
not be using the device for a longer period of time.
•
Never short-circuit the supply terminal in the battery
compartment!
•
Do not swallow batteries! If a battery is swallowed, it can
cause severe internal burns within 2 hours! These burns
can lead to death!
•
If you think batteries might have been swallowed or
otherwise entered the body, seek medical attention
immediately!
•
Keep new and used batteries and an open battery
compartment away from children.
•
If the battery compartment does not close securely, stop
using the product via the remote control.
Intended use
The device is only suitable for well insulated spaces or
occasional use.
The fan heater serves the purpose of heating and ventilating
closed rooms. The device was designed for private usage and is
not suited for commercial use. The device is particularly well
suited for additional heating. The device is only intended for
floor installation.
