Trotec TCH 2000 E, Руководство по эксплуатации

Страница: 12 / 18

11 EN Operating manual – designer glass convector TCH 2000 E
Automatic switch-on
ü
The device is switched on.
ü
The device is in frost monitor heating mode .
1. Press the TIME button (17).
2. Select the desired number of hours by use of the arrow
buttons (18 or 19). The value range is between 1 and 23.
ð
The number of hours flashes on the hours / minutes
indication (23).
3. Press the TIME button (17).
4. Select the desired number of minutes by use of the arrow
buttons (18 or 19). The value range is between 1 and 59.
ð
The number of minutes flashes on the hours / minutes
indication (23).
5. Press the TIME button (17).
ð The desired time until automatic switch-on is saved.
ð
The timer (22) and frost monitor heating mode (12)
indications flash.
ð
The time left until switch-on is shown on the hours /
minutes indication (23) and counted down.
ð
The device will then start in comfort heating mode with
the last set temperature.
Notes regarding automatic switch-on:
• Manually switching the device on disables the automatic
switch-on function.
• If you select 0 hours, the timer will be off.
Automatic switch-off
ü
The device is switched on.
ü
The device is in heating mode ( comfort or economy ).
1. Press the TIME button (17).
2. Select the desired number of hours by use of the arrow
buttons (18 or 19). The value range is between 1 and 23.
ð
The number of hours flashes on the hours / minutes
indication (23).
3. Press the TIME button (17).
4. Select the desired number of minutes by use of the arrow
buttons (18 or 19). The value range is between 1 and 59.
ð
The number of minutes flashes on the hours / minutes
indication (23).
5. Press the TIME button (17).
ð
The desired time until automatic switch-off is saved.
ð
The timer indication (22) flashes.
ð
The time left until switch-off is shown on the hours /
minutes indication (23) and counted down.
ð In device will then switch to standby mode.
Notes regarding automatic switch-off:
• Manually switching the device off disables the automatic
switch-off function.
• If you select 0 hours, the timer will be off.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
MODE
TEMP
TIMER
21
20
16
17
18
19
25
No. Designation Meaning
16 TEMP button Setting the desired room temperature
17 TIME button Switching the timer function on and
off (1 min to 24 h):
1 to 23 h in increments of 1 h,
1 to 59 min in increments of 1 min
18 Increase value button Setting the desired room temperature
(15 °C to 50 °C) or the number of
hours of the timer (1 min to 24 h)
19 Decrease value button
20 MODE button Selecting the operating mode:
Comfort heating mode
Economy heating mode
Frost monitor heating mode
21 Power button Switching the device on or activating
standby mode
25 Transmitter Sends signals to the device
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Switch off the device.
2. Hold onto the mains plug while pulling the power cable out
of the mains socket.
3. Allow the device to cool down sufficiently.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.