Trotec TAC 750 E, Руководство по эксплуатации, Страница: 6 / 12

5 Operating Manual – Air Cleaner TAC 750 E EN
The accurate functionality of the device was tested during
production a number of times. However, if functionality faults do
occur, then check the device according to the following list.
The device does not start:
• Check the power connection (230 V AC /50 Hz).
• Check the mains plug for damages.
• Check the position of the speed controller.
Your device still does not operate correctly after these
checks?
Please contact the TROTEC
®
customer service.
Repair work which requires the housing to be opened
must only be carried out by electrically skilled
persons or by TROTEC
®
.
Activities required before starting maintenance
• Do not touch the mains plug with wet or damp hands.
Before opening the device, switch the device off and
disconnect it from the mains.
Changing the filter
1. Unlock both tension locks (5) at the left and right side of the
device.
2. Remove the front cover (6) from the device.
3. Remove the air filter.
Note
If you only want to change this air filter, please continue
with step 10.
If you want to exchange the HEPA filter as well, please
continue with step 4.
4. Remove the four knurled screws (12).
5. Remove the cover (13) from the device.
Errors and faults
Maintenance
5
6
5
1, 2
12
12
13