Trotec TAC 750 E, Руководство по эксплуатации, Страница: 5 / 12

EN Operating Manual – Air Cleaner TAC 750 E 4
Transport
For easier transportation the device is equipped with a transport
handle.
Before transporting the device, proceed as follows:
1. Switch off the device.
2. Disconnect the mains plug from the socket and coil up the
cable. Do not use the power cable to drag the device!
Storage
When the device is not being used, observe the following storage
conditions:
• Dry,
• Protected from dust and direct sunlight,
• With a plastic cover to protect it from invasive dust, if
necessary.
Caution!
In order to protect the device from damage, we
recommend using it with at least one filter.
• Position the device near the source of air contamination or
install the air hose at this source.
• Set the device in an upright and stable position.
• Do not create tripping hazards when laying the power cable
or other electric cables.
• Make sure that no curtains or other objects interfere with the
air flow.
• Make sure that extension cords are completely unrolled.
1. Completely unwind the power cable and connect it to a fused
socket.
2. Press the On/Off switch (8).
– The switch lights up in green.
– The fan starts running after a delay.
3. Adjust the speed controller (10) to the desired intensity level.
Shutdown
1. Press the On/Off switch (8).
2. Remove the mains plug from the mains socket.
3. Clean the device according to chapter Maintenance.
4. Store the device according to chapter Storage.
Transport and storage
Operation
Start-up
8
10