Sheridan College
6
Close the lid before print!
Troubleshooting
•
If Speedy 300 won’t cut and/or engrave in the right way, press ‘pause’ on your screen. Check in the
AutoCAD file if you have drawn all lines as polylines, splines or circles. Check if you placed all lines
on the same layer in the layer control. Check if there are no overlapping lines
Units in Job Control:
Click “Settings”
“Options”
Select units in pull down menu and press “OK” (Note: If units are in inches, it will tell you to select a
number within some range, this is a bug in the software so ignore it and exit out, the changes will still be
made)
