Sheridan College
2
Install the sheet on the table and position to the top-
left corner. Find the focusing probe that has a pin color
that matches the lens color and rest in on the
edge
of
the laser head. Bring the Z axis up until it’s about 2mm
above the surface and tap it the rest of the way until
the focusing probe just falls off.
Open Autocad and your drawing (dwg, dxf).
The machine is able to do two operations and they are differentiated by colors.
Cutting operation: Color RED, Line weight=0
Engraving operation: Color BLACK
You can address more colors for these operations later.
Focusing on your material:
To be cut
To be engraved
