Trotec SP1500, Руководство по эксплуатации

Страница: 26 / 53

26 / 53 8018_SP1500

V2.2_EN (03/2018)
6.2 Shipping conditions
- When transporting outdoors, only transport in shipping vehicles
with roofs or sufficient weather protection.
- Protect machine from shipping damage using tie-down straps,
packaging materials and sufficient gaps to other shipped goods.
- Ambient temperature for transport:
Minimum temperature +10 °C (+50 F)
Maximum temperature +40 °C (+104 F)
- Handle machine and machine parts with care.
- Do not place any heavy loads on top of the machine or machine parts.
- Avoid harsh impacts.
- Only lift at the specified points.
- Take special care in transporting electronic components.
6.3 Unloading, inspection and damage reporting
After unloading:
- Remove shipping packaging.
- Dispose of packaging according to applicable waste disposal law.
- Inspect machine and machine parts for shipping damage.
- Check shipment for completeness.
In case of shipping damage or incomplete shipment:
- Immediately document the details of the damage.
- Also note the claim on shipping papers.
- Photograph the damage.
- Send report to Trotec.
6.4 Storage conditions
- Store machine and machine parts in a dry area.
- Protect machine and machine parts from scratches.
- Store electronic components especially carefully in a packaged state.
- In case of longer term storage, protect exposed metal parts
(e.g. oil the parts).
- Ambient temperature for storage:
Minimum temperature
+10 °C (+50 F)
Maximum temperature +40 °C (+104 F)
6.5 Storage Location
In storage room or packaged with adequate weather protection.
The storage location must be free of caustic materials, vapors and
combustible materials.