7
EN
Operating manual – tacker PTNS 10-230V
Start-up
Unpacking the device
•
Take the device and the accessories out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
•
Check the scope of delivery for completeness and look for
damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
•
Dispose of the packaging material according to the
national regulations.
Filling the magazine
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning
Make sure that the device is switched off.
Make sure not to hold the device by the trigger when a
staple or wire nail is jammed inside!
The trigger could be actuated by accident while
removing a jammed staple or wire nail.
Wear safety glasses
Wear appropriate eye protection when working with
the device.
Info
At the magazine filling level indicator you can check
whether any staples or wire nails are left in the
magazine.
Info
Do not open or close the magazine by force (e.g. for
filling).
1. Turn the bottom of the device up.
2. Squeeze the magazine release (3) together and pull the
magazine slider (6) out towards the back.
3
6
3. Insert the staples (8) in the magazine (9) with their tips
pointing up.
8
9