Trotec PT 6500 S, Руководство по эксплуатации

Страница: 6 / 16

5
Operating Manual – Air Conditioner PT 6500 S
EN
Transport
Prior to every transport observe the following instructions:
1. Switch off the device.
2. Remove the mains plug from the mains socket.
3. Disconnect all connections between basic device and
external heat exchanger.
4. Empty the tank.
Storage
Empty the tank and dispose of the water / glycol mixture properly.
When the device is not being used, observe the following storage
conditions:
• dry,
• protected from dust and direct sunlight,
• with a plastic cover to protect it from invasive dust, if
necessary.
• Avoid open doors and windows.
Installation of the basic device
When positioning the device, observe the minimum distance from
walls or other objects as described in the chapter Technical data.
• Set the device up in a level, upright and stable position.
• Do not create tripping hazards when laying the power cable
or other lines.
• Make sure that no curtains or other objects interfere with the
air flow.
• Ensure that extension cords are completely unrolled.
Installation of the external heat exchanger
Please note, that to the front the external heat exchanger requires
a minimum distance of 3 m to the wall or other objects.
To the rear a spacer ensures the correct distance.
Connecting basic device and external heat exchanger
Wear safety glasses
For start-up, maintenance and fault clearance always
wear safety glasses.
Wear protective gloves
For start-up, maintenance and fault clearance always
wear protective gloves.
1. Connect the condensation hose (3) to the connection (11)
provided at the external heat exchanger.
2. Connect the external heat exchanger with the power
cable (13, 8).
3. Connect the lines (red for the cooling water transport to the
external heat exchanger (4, 9), blue for the cooling water
transport from the external heat exchanger (12, 10)).
Transport and storage
Operation
C C
A
B
D
14
3
13
12
4
8
10
9
11