6
EN
digital soldering station PSIS 10-230V
Warning
Avoid eating, drinking and smoking in rooms where
soldering work is carried out. Otherwise, traces of lead
remaining on your hands may enter the human
organism via food or cigarettes.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Note
Avoid touching the hot soldering tip with the plastic
parts of the holder. Otherwise the device may be
damaged.
Behaviour in the event of an emergency / emergency
stop function
Emergency stop:
Removing the mains plug from the mains socket results in the
function of the device immediately stopping. In order to secure
the device against accidental switch-on, leave the mains plug
disconnected.
Behaviour in the event of an emergency:
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The device
PSIS 10-230V
consists of a digital soldering station
with connected soldering iron and a soldering iron holder.
The soldering station produces temperatures of 200 °C
to 450 °C at the soldering tip. Three temperature stages
(200 °C / 300 °C / 400 °C) can be preselected via the control
panel of the digital soldering station. The "+" and "-" buttons
serve for precisely adjusting the temperature in increments
of 10 °C. The LC display of the control panel indicates the
current temperature and the process for the heating-up phase.
The soldering tips can be replaced which allows you to adapt
them to the desired application purpose (3 soldering tips
included in the scope of delivery).
Storage compartments for storing soldering tips and solder are
integrated in the soldering station and facilitate working.
