EN
11
850W pendulum action jigsaw PJSS 13-230V
Adjusting the cutting angle
The cutting angle can be adjusted to the left or right at angles of
0° / 15° / 30° / 45°.
1. First, remove the anti-splinter guard (
11
) and the
protective cover (
16
).
16
11
2. Push the base plate lock (
14
) to the front.
14
3. Slide the base plate (
6
) to the rear until it can be freely
rotated.
4. Set the desired cutting angle. The number of degrees to be
set is engraved on the base plate (
6
).
5. Slide the base plate (
6
) back to the front until the toothing
engages.
6. Push the base plate lock (
14
) to the rear.
7. Check the base plate (
6
) for tight fit.