EN
13
cordless grass and shrub shears PGSS 10-20V
Removing the battery
1. Detach the battery (
10
) from the device by pressing and
holding the unlocking button (
15
, I.) and pulling the battery
off the device (II.).
15
10
2. If required, charge the battery (
10
) as described in the
section
Charging the battery
.
Checking the battery charging status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication (
11
):
LED colour
Meaning
Green – Orange – Red
maximum charge / power
Orange – Red
medium charge / power
Red
weak charge – Recharge the
battery.
1. Press on the battery icon (
16
) on the battery (
10
).
ð
You can read the battery status from the battery level
indication (
11
).
16
11
Changing the shear attachment
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
If necessary, remove grass and leaf debris from the
mounting flange before changing the attachment.
Please proceed as follows to remove or to insert the shear
attachment (
4
,
5
):
1. Remove the battery (
10
) from the device.
2. If necessary, put the protective cover (
6
,
7
) on the shear
attachment.
6
3. Press the two release buttons (
9
) on both sides of the
shear attachment (
4
,
5
) and remove the shear
attachment (
4
,
5
).
5
9