12
EN
monobloc air conditioner without external unit PAC-W 2600 SH
Cooling
In
cooling
mode the room will be cooled down to the desired
target temperature.
1. Press the
MODE
button (
17
) until the
cooling
LED (
10
) is
illuminated.
2. Press the
Increase value
(
20
) or
Decrease value
button (
21
)
to select the desired target temperature. The temperature
can be adjusted in increments of 1 °C in a range
between 16 °C and 30 °C.
ð
The desired target temperature is indicated on the
segment display (
9
).
3. Press the
fan speed
button (
18
) to set the desired fan
stage.
ð
The
fan speed
LED (
15
) for the desired fan stage will be
illuminated.
ð
The
cooling
LED (
10
) will be illuminated to indicate
cooling
mode.
Ventilation
In
ventilation
mode the room air is circulated, it will neither be
cooled nor dehumidified.
1. Press the
MODE
button (
17
) until the LED for
ventilation
(
11
) lights up.
2. Press the
SPEED
button (
18
) to set the desired fan speed.
ð
The LED for the selected fan speed (
15
) will be
illuminated.
Dehumidification
In
dehumidification
mode the humidity level in the room is
reduced.
The temperature cannot be adjusted and the fan runs at the
lowest speed level.
1. Press the
MODE
button (
17
) until the
dehumidification
LED (
12
) is illuminated.
ð
Dehumidification
mode is selected.
ð
The temperature and the fan speed (stage 1) are preset
in this operating mode and cannot be changed.
ð
The current room temperature is indicated on the
segment display (
9
).
Heating
Warning of hot surface
In heating mode, the ventilation flap at the air outlet
may become very hot and cause burns. Do not touch
the ventilation flap during and after heating operation.
Risk of burns.
In
heating
mode the room will be heated up to the desired target
temperature.
1. Press the
mode
button (
17
) until the
heating
LED (
13
) is
illuminated.
ð
Heating
mode is selected.
2. Repeatedly press the
increase value
(
20
) or
decrease value
button (
21
) to select the desired target temperature. The
temperature can be adjusted in increments of 1 °C in a
range between 16 °C and 30 °C.
ð
The desired target temperature is indicated on the
segment display (
9
).
Night mode
Night mode can be activated in
cooling
and
heating
mode.
The following settings are part of the night mode's
cooling
mode:
•
After 1 hour the preset temperature is increased by 1 °C.
After another hour the preset temperature will again be
increased by 1 °C.
•
Temperature and fan speed cannot be changed in night
mode.
The following settings are part of the night mode's
heating
mode
:
•
After 1 hour the preset temperature is decreased by 1 °C.
After another hour the preset temperature will again be
decreased by 1 °C.
•
Temperature and fan speed cannot be changed in night
mode.
To activate night mode, please proceed as follows:
1. Select
cooling
or
heating
mode.
2. Press the
sleep
button (
27
) on the remote control.
ð
The
cooling
LED (
10
) or
heating
LED (
13
) and
sleep
LED (
14
) are illuminated.
3. In order to switch the night mode off, press the
sleep
button (
27
).
ð
The
sleep
LED (
14
) turns off.
ð
The selected operating mode remains active.
