10
EN
radiant heater IR 2005 SC / IRS 2005
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
Operating elements
8
9
No.
Designation
8
Flip switch for heating level 700 W
(with flip switch
9
altogether = 2000 W)
O
: OFF
I
: ON
9
Flip switch for heating level 1300 W
(with flip switch
8
altogether = 2000 W)
O
: OFF
II
: ON
Warning
Fire hazard due to incorrect start-up!
There is a fire hazard if the radiant heaters are not
extended properly.
Always mount the radiant heaters before the start-up
as specified in the “Assembly and start-up” chapter.
Warning of hot surface
The protective grid (
1
) heats up during operation and
can still be hot after switch-off.
Do not touch the protective grid (
1
) during operation,
wait until it has cooled down after switch-off.
Warning of hot surface
The heating blades can get very hot and cause burns
or damage on the device.
Allow the device to cool down before retracting it.