EN
8
Operating manual – oil heater IDE 20 D / IDE 30 D / IDE 50 D / IDE 60 D / IDE 100 D
Operation
The device may only be used by accordingly instructed persons.
Operating elements
IDE 20 D / IDE 30 D
12
13
14
IDE 50 D / IDE 60 D
12
14
13
IDE 100 D
15
16
13
12
No.
Designation
12
Rotary control thermostat
13
ON/OFF switch
14
Operating LED
15
Target value indication
16
Room temperature indication
Switching the device on
Wear hearing protection.
Excessive noise can lead to hearing loss.
The device continues to operate until the desired room
temperature is reached.
1. Set the on/off switch (13) to position
I
.
ð
The on/off switch (13) is illuminated.
2. Set the rotary control (12) to the desired room
temperature. This value should be higher than the current
room temperature.
3. Ensure a successful ignition.
Switching the device off
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Notice
Damage to the device due to overheating!
Never switch off the device by pulling the mains plug.
This may lead to overheating!
Switch off the device properly. Only pull the mains plug
once the fan motor has stopped completely.
1. Switch off the device by setting the on/off switch (13) to
position
0
.
ð
The on/off switch (13) is no longer illuminated.
2. Wait until the fan motor has come to a complete standstill.
3. Secure the device against inadvertent switch-on by pulling
the mains plug.
4. Allow the device to cool down completely.
