B
-
21
Operating manual – Infrared camera
Please contact your motherboard’s manufacturer for
the latest driver.
5. The USB2.0 real-time transmission function may not
properly work under some model of motherboard’s
chipset. In this case, connect the IR camera to another
computer which is based on the chipset which is in
the chipset supporting list and try again.
Use the Bluetooth headset
There is Bluetooth model in the camera, you
can use the Bluetooth headset (optional) to
record the voice memos. Follow the steps to
install the Bluetooth headset (optional) fi rst
time.
1. Turn off the camera and Bluetooth headset.
2 . Turn on the Bluetooth headset fi rst.
Press and hold the power button (A) about
5 seconds. And then you can see the power indicator
begins to fl ash red then blue. The headset is in pairing
mode in 2 seconds. The blinking rhythm gets slower
and the LED blinks in blue.
3 . Turn on the camera while the Bluetooth headset is
still blinking in blue/red. You can see the power indicator
of camera lights green and fl ashes blue at the same
time. In the mode, camera is preparing to banding the
Bluetooth headset.
4
.
When the headset is in pairmode press
briefl
y the power button of Bluetooth headset
about 2 seconds to band the headset and came-
ra. The blinking rhythm of the camera LED chan-
ges into short, one second long blink intervals. Press
the ON/OFF key of your Bluetooth headset 1x briefl y
and the Bluetooth symbol appears in the camera
display. The camera LED now lights up permanently
in green and blue! The Bluetooth mode is now activa-
ted.
5. After banded the ca-
mera and headset fi rst
time. In next time, fi rst
turn on the headset to
see the power indica-
tor blinks blue, and
then turn on the camera. When the camera has pow-
ered up, repeat Step 4 to activate the Bluetooth
mode again.
6. Wear the headset, you can record the vioce memos
or play back the memos now.
The Bluetooth headset has been successfully re-
cognised
1. Switching off the Bluetooth headset:
Press and hold the ON/OFF key until the red LED
lights up.
2. Switching on the Bluetooth headset:
Press and hold the ON/OFF key until the blue
LED lights up. To charge simply connect the
the headset to your PC via the USB cable
included in the scope of delivery.
Optional accessories
- Different lenses
- Power supply
- Safe case
09. CARE AND MAINTENANCE
Use the following procedures to clean the camera body,
lens, LCD monitor and other parts.
Camera Body
Wipe the body clean with soft cloth or eyeglass lens wiper.
Lens
First use a lens blower brush to remove dust and dirt,
then remove any remaining dirt by wiping the lens lightly
with soft cloth.
Never use synthetic cleaners on the camera body or lens.
