EN
7
luxmeter BF06WP
Measurement settings
Proceed as follows to adjust the settings for the measurement:
1. Press the
Menu
button (11) or the free area below the
measured value display.
ð
The context menu opens.
2. Adjust the settings as required.
12
13
14
15
16
SENSORS
MEASUREMENTS
REPORTS
CUSTOMERS
SETTINGS
Reset min / max / Ø
X/T measurement
Disconnect sensor
Sensor settings
Start recording
BF06WP
Brightness
[3.003 | 4.999] Ø 4.038
No. Designation
Meaning
12
Reset min / max /
Ø
button
Deletes the determined values.
13
X/T measurement
button
Switches between continuous
measurement and individual
measurement.
14
Disconnect sensor
button
Disconnects the connected
appSensor from the terminal device.
15
Sensor settings
button
Opens the settings menu for the
connected appSensor.
16
Start recording
button Starts a recording of the determined
measured values for later
evaluation.
Individual value measurement
Proceed as follows to select the individual value measurement
as measuring mode:
1. Press the
Menu
button (11) to open the context menu for
sensors.
2. Press the
X/T measurement
button (13) to switch from
continuous measurement to individual value measurement.
ð
Individual value measurement has been selected as
measuring mode.
ð
Return to the screen displaying the measured values.
ð
The first measured value is automatically determined
and displayed.
SENSORS
MEASUREMENTS
REPORTS
CUSTOMERS
SETTINGS
18
19
17
Refresh measured value
BF06WP
Brightness
[3.003 | 4.999] Ø 4.038
No. Designation
Meaning
17
Individual value
indication
Indicates the illuminance as measured
over the course of time.
18 Numeric display
Indicates the minimum, maximum and
average values for the sound level as
well as the current illuminance value.
19
Refresh measured
value
button
Performs an individual value
measurement and refreshes the
displays (17) and (18).
Refreshing the measured value
Proceed as follows to refresh the measured values in the
individual value measurement mode:
1. Press the
Refresh measured value
button (19) on the
terminal device.
ð
The appSensor determines the current measured value
which is then displayed on the terminal device.
2. You can also press the
On / off / measurement
button (3)
on the appSensor.
ð
The appSensor determines the current measured value
which is then displayed on the terminal device.
