8
EN
cross line laser BD7A
Application example for the universal clamp
1. Loosen the locking screw (12) and push the clamping
jaws (15) apart until they fit onto the carrier (here: shelf).
2. Tighten the screw (12) until the jaws (15) of the universal
clamp are firmly attached to the carrier and the mount can
no longer be moved to and fro.
3. To unfasten the clamping jaws (15), loosen the screw (12)
until the retainer can be removed from the carrier without
difficulty.
Application example for the suction cup
1. Make sure that the surface is smooth and clean.
2. Disengage the lever (13) at the suction cup (14).
3. Press the suction cup (14) against the surface (here: tiles).
4. Engage the lever (13) until it locks in place.
5. Check the suction cup (14) for tight fit.
6. In order to remove the suction cup (14) again, release the
lever (13), then pull at the lug of the suction cup.
