Operating manual – Humidifier B 200
B -
4
CHASSIS/POWER PACK
11. Place the chassis/power pack unit into the cabi-
net, so it fits without tipping or rocking.
12. Fill the bottle water. If you only have softened wa-
ter available in your home, you can use it, but you
will notice a buildup of minerals on the wick much
sooner. The bottle holds 2.5 gallons. When filling,
be careful not to pressurize it by overfilling. Bottle
damage can result from this. A fill hose is provided
with your humidifier which will fit most faucets.
Place the water bottle into the left side of the humi-
difier with the valve cap end down, so that the
groove in the water bottle faces the inside.
(D)
. Re-
place the water bottle cover.
NOTE: We recommend using B 200 Bacterios-
tat treatment when you refill the water bottle
to eliminate bacterial growth. Add bacterios-
tat according to the instructions on the bottle
and then tighten the valve cap on your water
bottle.
NOTE: For optimum running time, fill the water
bottle, tighten the cap, and place inside unit,
allowing it to completely drain into the water
reservoir. Then refill the bottle and replace in
the cabinet. Do not fill the reservoir bucket, as
overfilling will result in water damage. Use
only the bottle provided.
04. OPERATION
1. Plug cord into wall receptacle. Your humidifier is
now ready for use. The humidifier should be placed
at least FOUR inches away from any walls and away
from heat registers. Unrestricted airflow into the
unit will result in the best efficiency and perfor-
mance.
2. The B 200 allows you to use the low setting for the
quietest operation.
3. All models have an automatic humidistat. The hu-
midistat will turn the humidifier on when the rela-
C
D
Содержание B 200
