EN
8
Operating manual – air washer AW 10 S
Cleaning the upper louvre
Clean the upper louvre if it shows visible soiling.
ü
The device is switched off and disconnected from the
mains.
1. Loosen the upper screw at the rear of the device with a
suitable screwdriver (Phillips, +).
2. Remove the louvre.
3. Clean the louvre with a damp, lint-free cloth or with a
vacuum cleaner.
4. Should the fins of the fan be heavily soiled too, you can
remove the dust with a dry duster or a vacuum cleaner (low
stage). Make sure that no moisture enters the fan.
5. Place the louvre back on the device until it engages.
6. Tighten the screw at the rear.
