EN
7
pyrometer TP7
Technical data
Parameter
Value
Model
TP7
Weight
224 g
Dimensions
(length x width x height)
160 mm x 49 mm x 122 mm
Measuring range
-50 °C to 1000 °C (-58 °F to
1832 °F)
Resolution
0.1 °C / °F
Target display
Laser class II, 630 to 670 nm
< 1 mW
Accuracy
±2.5 °C (±4.5 °F) at -50 °C to
20 °C (-58 °F to 68 °F)
±1 % at 21 °C to 300 °C
(69 °F to 572 °F)
±1.5 % at 301 °C to 1000 °C
(573 °F to 1832 °F)
Degree of emission
Adjustable from 0.10 to 1.0
Optical resolution
40:1 (D:S)
Smallest measuring spot
ø 25.4 mm
Spectral sensitivity
8~14 μm
Response time
< 150 ms
Operating temperature
0 °C to 50 °C (32 °F to
122 °F), 10 % to 90 % RH
Storage conditions
-10 °C to 60 °C, < 80 % RH
Power supply
9 V battery
Switch-off
After approx. 10 seconds of
non-use
Scope of delivery
•
1 x Device
TP7
•
1 x 9 V battery
•
1 x Quick guide
•
1 x Storage bag
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device use a suitable bag to protect it from
external influences.
The manufacturer packed the device to the best of his abilities
to protect it against transport damage.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
protected from dust and direct sunlight
•
the storage temperature complies with the values specified
in the Technical data
•
Remove the battery from the device.
Operation
Inserting the battery
Note
Make sure that the surface of the device is dry and the
device is switched off.
21
22
1. Open the battery compartment by folding open the
cover (22) with your fingers.
2. Use the battery clip (21) to connect the new battery
(1 x 9 V) with correct polarity.
3. Close the cover of the battery compartment.
