Trotec 3510003012 Скачать руководство пользователя страница 3

EN

3

pyrometer TP7

Never short-circuit the supply terminal in the battery
compartment!

Do not swallow batteries! If a battery is swallowed, it can
cause severe internal burns within 2 hours! These burns
can lead to death!

If you think batteries might have been swallowed or
otherwise entered the body, seek medical attention
immediately!

Keep new and used batteries and an open battery
compartment away from children.

Observe the storage and operating conditions (see
Technical data).

Intended use

This device is exclusively intended for measuring temperature
by means of an infrared sensor in the measuring range
specified in the technical data. People who use this device must
have read and understood the operating manual, especially the
Safety chapter.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.

Foreseeable misuse

The device must not be pointed at people. Do not use the device
in potentially explosive atmospheres, for measurements in
liquids or at live parts. Trotec accepts no liability for damages
resulting from improper use. In such a case, any warranty
claims will be voided. Any unauthorised modifications,
alterations or structural changes to the device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
laser measuring devices.

have read and understood the operating manual, especially
the Safety chapter.

Safety signs and labels on the device

Note

Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.

The following safety signs and labels are attached to the device:

Warning
sign

Meaning

The warning sign is located on the back of the
device and indicates that the device is equipped
with a class 2 laser.
The power is less than 1.0 mW. The frequency
range of the laser is 630 to 670 nm.

Do not look directly into the laser beam or the
opening from which the laser beam emerges!

Residual risks

Warning of electrical voltage

There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of laser radiation
Laser class 2, P max.: < 1 mW, λ: 400-700 nm,
EN 60825-1:2014

Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class 2, observe the
national regulations on wearing eye protection.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Warning

The device is not a toy and does not belong in the
hands of children.

Содержание 3510003012












Отзывы: