EN
9
sound locator LD6
3. Press the frequency button (6) three times to activate all
frequencies.
3x
ð
The frequency LEDs (2) go out.
Exchanging the measuring tip
The measuring tip design can vary depending on the surface to
be measured or on the medium contained in the conveyor line.
Upon delivery the device comes equipped with the standard
measuring tip, e.g. for checking water lines.
To exchange the measuring tip, please proceed as follows:
1. Unscrew the measuring tip from the device.
2. Instead attach for instance the pot magnet to the device.
The following schematic representation provides an overview of
the possible combinations. You can use one or both extensions
as needed.
Switching the headphones off
1. Press the
power
button (12) until the headphone LED (13)
lights up in red. An acoustic confirmation signal is emitted
additionally.
ð
The headphones switch off.
Switching the device off
1. Press and hold the power button (8) at the device for
approx. 3 s until the LEDs light up briefly.
ð
The device switches off.
