EN
5
sound locator LD6
Headphones (noise-cancelling)
Parameter
Value
Bluetooth frequency
2,402 to 2,480 GHz
Bluetooth version
Version 4.0 class 2
Supported Bluetooth profiles
A2DP, AVRCP, HSP, HFP
Supported codecs
SBC (subband codec)
Range
Up to 10 metres in an open
area without obstructions
Power supply
Li-ion battery
Battery capacity
250 mAh
Battery charging voltage
5 V (Micro USB)
Battery charging time
approx. 2 h to 3 h
Battery operating time per
charge
approx. up to 10 h
•
at medium volume
Operating conditions
-10 °C to +40 °C
Storage conditions
-10 °C to +40 °C
Audio input
DC3.5 female
Dimensions
(length x width x height)
210 x 170 x 50 (mm)
Weight (headphones only)
180g
Scope of delivery
•
1 x Measuring device LD6 with measuring tip (e.g. for
water lines, valves)
•
1 x Headphones
•
1 x 220 V charger with 3 exchangeable travel adapters
•
1 x 12 V charger
•
2 x Micro USB charging cable for measuring device and
headphones each
•
2 x Extension rod
•
1 x Tripod (e.g. for flooring)
•
1 x Pot magnet (e.g. for fittings, valves and magnetic lines)
•
1 x Transport case
•
1 x Quick guide
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device, use the transport case included in
the scope of delivery in order to protect the device from external
influences.
The supplied Li-ion batteries are subjects to the requirements of
dangerous goods legislation.
Observe the following when transporting or shipping Li-ion
batteries:
•
The user may transport the batteries by road without any
additional requirements.
•
If transport is carried out by third parties (e.g. air transport
or forwarding company), special requirements as to
packaging and labelling must be observed. This includes
consulting a dangerous goods specialist when preparing
the package.
– Only ship batteries if their housing is undamaged.
– Please also observe any other national regulations.
Storage
When the device is not being used, observe the following
storage conditions:
•
Dry and protected from frost and heat
•
Protected from dust and direct sunlight
•
For storing the device, use the transport case included in
the scope of delivery in order to protect the device from
external influences.
•
The storage temperature is the same as the range given in
the Technical data chapter.
