1
EN
Operating manual – thermohygrometer BC25
Table of contents
Notes regarding the operating manual................................. 1
Safety ..................................................................................... 2
Information about the device................................................ 3
Transport and storage........................................................... 7
Operation ............................................................................... 7
Errors and faults.................................................................... 9
Maintenance and repair ...................................................... 10
Disposal ............................................................................... 10
Notes regarding the operating manual
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Notice
This signal word indicates important information
(e.g. material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
You can download the current version of the operating manual
and the EU declaration of conformity via the following link:
BC25
http://hub.trotec.com/?id=39585
Legal notice
This release replaces all previous versions. No part of this
publication may be reproduced without written permission from
Trotec GmbH & Co. KG
. The same applies for electronically
processing, duplicating or spreading the publication. Subject to
technical changes. All rights reserved. Trademarks are used
without guarantee that they may be used freely and primarily
following the spelling of the manufacturer. Product names are
registered.
Changes to construction in the interests of constant
improvements to the product, as well as changes to the shape
and colour are reserved.
The scope of delivery may vary from product images. This
document was created with all due care.
Trotec GmbH & Co. KG
accepts no liability whatsoever for
possible mistakes or omissions.
The only party responsible for determining valid measured
results, drawing conclusions and deriving actions is the user.
Trotec GmbH & Co. KG
accepts no claims of warranty for the
correctness of the determined measured values or measured
results.
Further,
Trotec GmbH & Co. KG
accepts no liability whatsoever
for possible mistakes or damage which have been caused by
utilising the determined measured results.
©
Trotec GmbH & Co. KG
