EN
7
fan heater TFH 19 E
•
The device can be variably positioned in a way to allow an
air discharge at an angle of 0° or 90°.
90°
0°
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
•
Avoid open doors and windows.
Control panel
1
3
2
No.
Designation
1
Function selector switch for ventilation and heating
levels
0
: OFF
: cold air / ventilation
I
: heating level 1 (1000 W)
II
: heating level 2 (2000 W)
2
Rotary switch room thermostat
3
Operating light
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
Setting the heating level
Info
Choose the smaller power stage e.g. for a smaller
room. Should it turn out to be insufficient, switch to the
higher level.
1. Set the function selector switch (1) to
I
.
ð
The device operates at heating level 1.
2. In order to achieve the maximum heating performance, set
the function selector switch (1) to position
II
.
ð
The device operates at heating level 2.
Cold air operation
If you want to use the device as fan, set the function selector
switch (1) to the fan stage
.
Setting the room thermostat
1. Select the desired room temperature via the stepless
rotary switch (2) of the room thermostat.
ð
The operating light (3) lights up as soon as the room
temperature is lower than the temperature set at the
room thermostat.
maximum
minimum
To find the ideal thermostat setting, please proceed as follows:
•
Set the thermostat control to maximum.
•
As soon as the desired temperature has been reached,
slowly turn the thermostat control back until the device is
switched off.
•
The device now automatically maintains the desired
temperature level.
The room thermostat controls the room temperature
automatically:
•
When exceeding the set value, both the heating and the
ventilation will be switched off.
•
When falling below the set value, both the heating and the
ventilation will automatically be switched back on.
Info
The desired room temperature should be higher than
the current room temperature.
