EN
5
fan heater TFH 19 E
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Overheating protection
The device is provided with a safety thermostat which is
activated by overheating of the device (when exceeding the
operating temperature).
Once the safety thermostat has switched itself on, the heating
will be turned off. The fan keeps running.
When the device has cooled down sufficiently, the heating will
be switched back on.
Investigate the cause of overheating.
If the safety thermostat does not switch in the event of
overheating, the overheating protection will be tripped. In that
case the device switches off completely. If so, please contact
the customer service to have the overheating protection
replaced.
Information about the device
Device description
The electric heater
TFH 19 E
serves to generate and distribute
warm air, e.g. in interior spaces.
The device generates heat by means of a heating element. The
air surrounding the heating element is heated. The heated air is
blown into the room by a fan.
The device is equipped with an integrated thermostat and so
generates a constant flow of warm air.
Fan operation without heating function is also possible.
The construction of the device allows for operation both in a
vertical and horizontal position.
Device depiction
1
2
3
4
4
7
5
6
No.
Designation
1
Function selector switch for ventilation and heating
levels
2
Rotary switch room thermostat
3
Operating light
4
Air inlet
5
Foot
6
Air outlet
7
Transport handle/foot
