background image

EN

5

radiant heater IR 2010 SC

Warning

In order to avoid overheating and fire hazards, the
device must not be covered!

Warning

Coarse dirt particles on the heating rods can cause the
device to overheat. Fire hazard!
Remove coarse dirt particles from the heating rods
according to the Maintenance chapter before switching
on the device.

Behaviour in the event of an emergency

1. Switch the device off.
2. In an emergency, disconnect the device from the mains

feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.

3. Do not reconnect a defective device to the mains.

Information about the device

Device description

The device is used to quickly generate instant heat.
The device is based on the functional principle of heat
generation by infrared radiation, which is generated by a
halogen tube. The infrared radiation is passed on to the
surrounding surfaces as heat radiation. Persons or objects are
heated directly.
The heating level and the LED elements can be adjusted via
remote control or directly on the control panel.

suitable for roofed and non-roofed outdoor use

for ceiling installation

silent operation

no dust circulation (suitable for allergy sufferers)

Содержание 1.410.003.810













Отзывы: