Trotec 1.180.000.020, Оригинальное руководство пользователя

Страница: 7 / 17

EN 7 odour neutraliser AirgoPro® 8
• Make sure that extension cables are completely unrolled.
• The room temperature should be approx. 5 °C higher than
the usual room temperature.
Connecting the power cable
• Insert the mains plug into a properly fused mains socket.
Operation
Note
Avoid open doors and windows.
Operating elements
4
6
7
8
12
Timer switch
13
14
15
16
No. Designation Description
4 On/off switch Switching the device on or off
O = switched off
I = switched on
6 Intensity level controller Set intensity levels for the
treatment
7 Fan speed controller Setting the fan speed
8 Timer switch Setting the treatment duration:
0 – 99 hours
(ozone generation
begins 1 minute after
activation)
12 Operating control lamp Illuminated when the device is
in operation
13 Scale Displays the set time
14 Multiplier display Indicates the set multiplier
15 Rotary switch for scale Setting the time scale
16 Rotary switch for
multiplier Setting the multiplier in the
following increments:
0-0.5 ,0-1, 0-5, 0-10
Caution
Risk of injury caused by inhalation of ozone!
During the air purification cycle, small amounts of
ozone (O
3
) may be produced. If necessary, gradually
reduce the production or take the device out of
operation!
The following symptoms could be indicative of
poisoning or an irritation caused by ozone:
- eye irritations – conjunctivitis, stinging and watering
eyes
- strong urge to cough
- shortness of breath – chest tightness
- pain while inhaling
- dizziness, light-headedness
- headache
- feeling of faintness
Should you experience one or more of the above
symptoms relating to the use of the odour neutraliser,
seek medical treatment immediately!
Info
Follow the instructions in chronological order as
described under
Carrying out an odour neutralisation
before switching on the device.