6.Turn on the power at breaker box - your fan is ready for operation.
Pull Chain Knob
Connect Pull Chain Knob provided from hardware bag to the pull chain from switch housing.
5. PULL CHAIN KNOB INSTALLATION
Fan Assembly
P6
1
4. BLADE INSTALLATION
Attach blade to blade holder with 3 blade screws and 3
washers provided from hardware bag.
Make sure all screws are firmly tightened.
rubber
Remove 3 motor stoppers by removing screws.
Secure Blade Assembly to the motor with 2 motor screws provided from hardware bag.
To prevent wobble, do not bend blade or blade holder.
NOTE:
1
2
3
Blade Screw (3)
Blade Holder
1
Blade Assembly
Motor screw (2)
Motor
Stopper (3)
2
3
Switch Housing
Blade
Rubber Washer (3)