P4
1E. Canopy Assembly
(For Flush mount)
1F. Hanging the fan
(For Flush mount)
Lift the fan assembly and hang onto the tab on
mounting bracket.
This will permit you to make the wire connections
without having to hold the fan up as well.
Note:
Mounting
Bracket
Tab
Canopy
decorating cap
Canopy
Canopy
set screw (3)
1D.
Hanging the fan
(For Downrod mount)
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
Lift fan assembly onto mounting bracket.
Mounting
Bracket
Ridge
Ball Groove
Mounting
Bracket
2. WIRE CONNECTION
1
2
Fan assembly
Fan assembly
Remove canopy decorating cap from bottom of canopy.
Fasten 3 canopy set screws provided from hardware bag
onto fan assembly firmly.
1
2
Follow diagram below and make sure that all exposed wires are secured inside wire nuts or terminal block.
Note : Wires from house may vary in color and may not include ground wire ( green ).
From House
White
Black
From Fan
White
Black
(AC-N)
(AC-L)
(MOTOR-N)
(MOTOR-L)
Green
Green
Green
( from downrod )
( from mounting bracket )
( for ground wire )
*White wire from house to white wire from fan
*Black wire from house to black wire and blue wire from fan
*Ground wire from house to green wire from downrod and from mounting bracket
*Secure with twist - lock wire nuts. (Included)
*
After wiring is completed, gently push wires into junction box with wire nuts pointing upward.
Making electrical wire connection.
Wire Form House
Blue
(For Light Kit)
Secure with twist - lock wire nuts.
Outlet Box
