Pole, Tower, and Streetlight Mounting Instructions
Tropos 5210 MetroMesh Router Installation Guide
15
Wood Brace Mounting
You can mount the pole bracket directly on a wood brace without using pole hose clamps, as
shown in
Figure 7
.
Figure 7 Wood Brace Mounting Option
Mount the Tropos 5210 MetroMesh router on a wood pole
1.
Select a mounting location. You can attach the router to any wood brace.
2.
Attach the pole bracket to the wood brace with two 1/4-inch lag bolts that are at least 2 1/2
inches in length, making sure that the wood brace is level.
3.
Attach the sun shield of the router to the pole bracket with three 5/16-inch machine screws.
Insert one screw through the hole in the center back of the sun shield and the other two
screws through the curved slot tracks.
Figure 5
on page 12 shows the proper screw locations
on the back of the sun shield.
Note
Use thread lubricant, such as Loctite 37230, when screwing the router into the sun
shield.
trp_141
Wood brace
1/4" lag bolts
2-1/2" minimum
