7
501584B Dining Base for 87” x 45” Stoneworks® Top
84” x 42” ~ 98” x 46” OEM Top
Minimum Size:
84” x 42” Rectangular with 63” x 39” Flat Bottom
Maximum Size:
98” x 46” Rectangular Top
Maximum Weight:
350 lbs.
Parts List
Top Ring Assembly
(2) Middle Legs
(2) Left Legs with Braces
(2) Right Legs with Braces
(12) 3/4” Bolts and Lock Washers
(4) 2” Bolts and Lock Nuts
(6) 1-¼ #10 Screws, self-tapping
With 2 persons, place the Table Top Ring Assembly upside down
on the prepared work surface.
Place one Middle Leg onto the Table Top Ring Assembly center
stub mount with the Leg Brace brackets angled up and out to the
end of the Table Top Ring Assembly.
Loosely install the bolts and washers to retain the Middle Leg to
the Top (2 bolts and washers).
Repeat this process for the other Middle Leg.
Sort the Left Legs and Right Legs into pairs.
Place one Leg upside down (glide feet up) onto the Table Top
Ring Assembly leg stub mount with the Leg Brace in the center
bracket.
If the Leg Brace doesn’t align to the center bracket,
move this leg to the near, adjacent stub mount.
Loosely install the bolts and washers to retain the Legs to the Top
(2 bolts and washers per leg).
Loosely install the bolt and lock nut to retain the Leg Brace into
the center bracket (bolt and lock nut).
Select the remaining leg from this pair place it onto the stub mount
diagonally across the Top Ring Assembly. Loosely install the
hardware per the steps above.
Repeat this process to install the remaining two legs and braces.
Fully tighten the bolts on the Center Brace (4 places).
Fully tighten the bolts on the Legs (8 places).
Fully tighten the bolts on Braces (4 places).
8
See next page for a diagram indicating left and right table leg
positions.
Tropitone table top attachment
Attach the four middle straps.
Do NOT attach the four straps at the corners.
Continue to page 10 for instructions on installing six self-
tapping screws.
Go to Page 10 for instructions on how to attach a
Tropitone table top.
Screws included with the base are specific for Tropitone
Stoneworks Table Tops only. Do not use with OEM tops.
