1
Universal KD Table Base Assembly
Stoneworks™ Top Attachment – Flat Underside
OEM Top Attachment
Thank you for selecting Tropitone furniture.
Read through all steps before assembling table bases and attaching tops.
Hardware must be loosely installed until all parts are attached.
Locate all items in the Parts List from your cartons.
Use the shipping carton, pool towels or a tarp to prepare a smooth, non-
scratch work surface.
WARNING:
Do not try to lift or flip furniture with only one person. Furniture
pieces may be heavy and awkward to handle, and may result in injury to
persons or damage to property if not lifted properly.
WARNING:
Do not sit on or put your full weight onto the table. Serious injury
could result.
CAUTION:
For Tropitone Stoneworks® tops, proper screw length should
allow ½” – ¾” of threads to penetrate into the top surface. Confirm proper
screw length before starting Top attachment.
Tools Required
Assembled tables are
large
&
heavy.
Put
together at place of use
.
2
7/16” Wrench or Ratchet
5/16” Socket Driver or Flathead
Screwdriver
Permanent Maker (Felt Tip)
Tape Measure
Safety Glasses
Other Equipment Manufacturer’s (OEM) Top Attachment
After assembly of the base, attaching another manufacturer’s top to the base
must be done per the other equipment manufacturer’s (OEM) instructions.
Tropitone is not responsible for damage to or failure of table tops during
assembly or use.
CAUTION:
Confirm screws provided with your OEM top are long enough to
secure the top and not too long so they pierce and damage the top. Do NOT use
Tropitone supplied screws on an OEM top.
Screws included with the base are specific for Tropitone
Stoneworks Table Tops only. Do not use with OEM tops.
