tropitone CURVE, Инструкция по сборке

Страница: 3 / 4

chaise with riser
tropitone.com | 3
COMPONENTS
A B
(1) Chaise (1) Riser
REQUIRED TOOL(S) HARDWARE
Phillips Head Screwdriver (4) Screws #14 x 2" (4) Washers
A SSEMBLY STEPS
#14 x 2" x 4
x 4
B
A
1. Place the Riser (B) on the Chaise (A).
Center the top of the Riser to the Chaise
seams and confirm the four pilot holes in
the Chaise are visible through the Riser.
2. Insert screws and washers as shown
and tighten firmly by hand.
ü Check that all hardware and components are in your carton before you start assembly.