tropitone 401400RD Series, Инструкция по установке и эксплуатации

Страница: 8 / 16

R9T12FIRE Page 8 of 16 Rev. H 06SEP17
LIGHTING INSTRUCTIONS
To light your new Fire Pit, complete all installation and safety instructions above. Be sure to install a
9 volt battery in the ignition system battery case mounted on the inside post of the right door frame.
To install the battery, follow the instructions on page 6.
Gas Valve
Knob
Spark Igniter
Switch
Gas Tank
Gas Valve
1. Make sure the gas valve on the gas tank is open (turned all the way to the left).
2. Rotate gas valve knob counter-clockwise (left) to center position.
3. Depress and hold the gas valve knob.
4. Turn “On” spark igniter by depressing switch in short bursts until pilot lights.
5. Once lit, release switch for spark igniter while continuing to depress valve knob for 20
seconds.
6. Turn knob counter-clockwise (left) to light main burner. NOTE: If fails to light, rotate knob to
center position, wait 5 minutes for gas to clear, repeat Steps 3 ~ 6. If pilot goes out, repeat
Steps 3 ~ 6.
7. Once Fire Pit has ignited, DO NOT leave unattended.
FIRE PIT SHUTDOWN
1. Turn “off” fire pit by slightly pressing and turning valve knob clockwise (right) to “OFF”
position.
2. Turn “off” gas to Fire Pit at LP tank or other remote location.
3. Once Fire Pit has cooled completely, use appropriate cover (sold separately) to protect Fire
Pit.
R9T12FIRE Page 8 of 16 Rev. H 06SEP17
LIGHTING INSTRUCTIONS
To light your new Fire Pit, complete all installation and safety instructions above. Be sure to install a
9 volt battery in the ignition system battery case mounted on the inside post of the right door frame.
To install the battery, follow the instructions on page 6.
Gas Valve
Knob
Spark Igniter
Switch
Gas Tank
Gas Valve
1. Make sure the gas valve on the gas tank is open (turned all the way to the left).
2. Rotate gas valve knob counter-clockwise (left) to center position.
3. Depress and hold the gas valve knob.
4. Turn “On” spark igniter by depressing switch in short bursts until pilot lights.
5. Once lit, release switch for spark igniter while continuing to depress valve knob for 20
seconds.
6. Turn knob counter-clockwise (left) to light main burner. NOTE: If fails to light, rotate knob to
center position, wait 5 minutes for gas to clear, repeat Steps 3 ~ 6. If pilot goes out, repeat
Steps 3 ~ 6.
7. Once Fire Pit has ignited, DO NOT leave unattended.
FIRE PIT SHUTDOWN
1. Turn “off” fire pit by slightly pressing and turning valve knob clockwise (right) to “OFF”
position.
2. Turn “off” gas to Fire Pit at LP tank or other remote location.
3. Once Fire Pit has cooled completely, use appropriate cover (sold separately) to protect Fire
Pit.
K
305251_R9T12FIRE.indd 8 9/14/17 2:18 PM