7
AMD-53-S2 MODULATOR / MULTIPLEXER
3.6. CONFIGURATIONS VIA THE ETHERNET INTERFACE
If it is necessary to change the basic configuration, the particular HTML user interface must be called up
on a computer connected to the device(s). All the settings can be made via Internet Browser. How the
user interface works is almost self-explanatory. Any special features of use will be explained in the
following chapters.
To use all functions of the device by WEB-interface activate Java Script in your browser settings.
Network connection to the computer System requirements: - PC/ laptop with 10/100/1000 Mbit Ethernet
interface - any Internet browser, capable JAVA script (Google Chrome is recommended). The device
has to be connected to PC network using an Ethernet cable. The default IP address of the device is
10.10.10.20. In order to access the WEB interface of the device from a PC, the PC has to be in the
255.255.255.0 subnet. If multiple devices are connected to the same network each device must be set to
its own unique IP address to avoid address conflicts. After these settings, the IP address of the PC has to
be adjusted to match the network.
3.7. CONNECTION SETUP
When the IP address for the device has been entered into the address field of the browser, a connection
will be made to the relevant device and the appropriate SYSTEM window will be displayed.
There are two options for the menu, depending on the choice of the INPUT MODE line
:
IP MODE or IP-
˃
MUX MODE.
The multiplexer function is not used when the
is selected. The transport stream is fed
IP INPUT MODE
to the modulator output unchanged.
BACKUP. You can save all settings of the device as a backup.json file.
RESTORE. You can upload a backup.json file to change the device configuration.
ADD KEY. You have the opportunity to make an additional order for the TROPHY-ACCESS license. The
received key must be entered after pressing the ADD KEY button.
INSTRUCTION MANUAL
