9
Operating Precautions
PREPARING ENGINE FOR STARTING
Before starting your unit, make sure the black throttle cable
housing is seated all the way into the brass ferrule at the engine
side of the cable.
THIS ENGINE USES A GAS/OIL MIXTURE. DO NOT RUN ON
STRAIGHT GAS ONLY, ENGINE DAMAGE WILL RESULT.
Fuel Mixture
Run ice auger with a 25:1 ratio of unleaded gasoline and 2-cycle
engine oil.
MIXING FUEL AND FILLING FUEL TANK
Mixing Fuel
1. Mix fuel in a container outside in a well ventilated area.
2. Fill certified fuel container 1/4 full of recommended fuel.
3. Add recommended amount of 2-cycle oil with fuel stabilizer.
4. Screw container cap on straight and tight.
5. Shake the container to mix fuel and oil.
6. Wipe away any spilled fuel or oil and allow to evaporate before
moving or transporting.
Filling Fuel Tank
1. Shut-off engine and allow engine to completely cool before
refilling the fuel tank.
2. Move to a well ventilated area, outdoors, away from flames and
sparks.
3. Clean debris from area around the fuel cap.
4. Loosen fuel cap slowly. Place the cap on a clean, dry surface.
5. Carefully add fuel without spilling.
6. Do not fill fuel tank completely full, allow space for fuel to
expand.
7. Immediately replace fuel cap and tighten. Wipe off spilled fuel
and allow to dry before starting engine.
!
WARNING
GAS
OIL
RATIO
1 gallon
5 ounces
25:1
2 gallons
10 ounces
25:1
5 gallons
25 ounces
25:1
